QL-Expansion slot, where to get the edge connector?

ql_freak · Post by **ql_freak** » Tue Mar 17, 2015 12:21 am

Does anyone know, where the connectors of the QL expansion bus are available, edge (male) and socket (female) connectors (both with and without 90 degrees angle) so you can build a backplane with more than one slot?

Paul · Post by **Paul** » Tue Mar 17, 2015 5:17 am

Female:
https://www.reichelt.de/Messer-Federl-D ... OFFSET=500
Male:
https://www.reichelt.de/Messer-Federl-D ... OFFSET=500
HTH

prime · Post by **prime** » Tue Mar 17, 2015 9:22 am

I believe farnell do both too.

Phill.

Ralf R. · Post by **Ralf R.** » Tue Mar 17, 2015 9:33 am

Paul wrote:Female:
https://www.reichelt.de/Messer-Federl-D ... OFFSET=500
Male:
https://www.reichelt.de/Messer-Federl-D ... OFFSET=500
HTH

For a backplane, he may need them with straight pins (ok, haven't look further there...

)

jose_leandro · Post by **jose_leandro** » Tue Mar 17, 2015 8:12 pm

Hi

I bought then in RS. I put the result of searching them in rs germany

http://de.rs-online.com/web/c/steckverb ... 1&aaaExp=Y

The code for female a+b 64 and 90º I use is 542-4675. I'm a bit surprise the price in germany is much cheaper that in spain :-O

Bye

José Leandro

Dave · Post by **Dave** » Tue Mar 17, 2015 8:21 pm

Why do you think it's called a DIN connector?

jose_leandro · Post by **jose_leandro** » Tue Mar 17, 2015 8:34 pm

Hi

Dave wrote:Why do you think it's called a DIN connector?

And also because RS slots put "made in germany" XD XD XD

Bye

José Leandro

Post by **XorA** » Tue Mar 17, 2015 10:38 pm

Dave wrote:Why do you think it's called a DIN connector?

Its short for DINnae use, pain in the ass!

Dave · Post by **Dave** » Wed Mar 18, 2015 4:03 pm

They're great connectors, but they're not very dense.

Paul · Post by **Paul** » Wed Mar 18, 2015 4:44 pm

The density is ok regarded to the Time when they were developed.
I think it's a pity that those quality connectors were designed for only 400 uses!
When you do some testing you are plugging those hundreds of times in one evening!

The Sinclair QL Forum

QL-Expansion slot, where to get the edge connector?

QL-Expansion slot, where to get the edge connector?

Re: QL-Expansion slot, where to get the edge connector?

Re: QL-Expansion slot, where to get the edge connector?

Re: QL-Expansion slot, where to get the edge connector?

Re: QL-Expansion slot, where to get the edge connector?

Re: QL-Expansion slot, where to get the edge connector?

Re: QL-Expansion slot, where to get the edge connector?

Re: QL-Expansion slot, where to get the edge connector?

Re: QL-Expansion slot, where to get the edge connector?

Re: QL-Expansion slot, where to get the edge connector?