DIY QubIDE Parts list

[XorA]

For the WIN_DISK command, does the INIT have to be in quotes, as a string?

Don't think so dilwyn as I've tried both and get the same result i.e. don't get invalid command or parameter.

BTW whay happened to your site as there are loads of links on QUBIDE pointing to it ?

See QL Homepage link at the top of forum! I think dilwyn is sick of explaining what happened to his site by now

[Derek_Stewart]

Hi,

My apologies, the WIN_DISK commands requires the command option to be in quotes, so to initialise the drive, which dextroys all the data and creztes a new partition table, use:

WIN_DISK "INIT",1

then, create the partition:

WIN_DISK "CREATE",1,1,64

Then format the drive.

This is all in the QubATA Manual.

[dilwyn]

For the WIN_DISK command, does the INIT have to be in quotes, as a string?

Don't think so dilwyn as I've tried both and get the same result i.e. don't get invalid command or parameter.

BTW whay happened to your site as there are loads of links on QUBIDE pointing to it ?

OK, so the commands must detect by name rather than string (never used QubATA, only inferred that from the manual).

Read the multitude of recent posts to find out what happened to my QL Homepage site (hint: look at top of QL Forum home page).
EDIT: Derek's reply and mine crossed, sorry.

[axeman]

Apologies dilwyn didn't want to open up an old wound. Had loads of sites with 123-reg myself and have just about moved away from them now.

For the WIN_DISK command, does the INIT have to be in quotes, as a string?

Don't think so dilwyn as I've tried both and get the same result i.e. don't get invalid command or parameter.

BTW whay happened to your site as there are loads of links on QUBIDE pointing to it ?

OK, so the commands must detect by name rather than string (never used QubATA, only inferred that from the manual).

Read the multitude of recent posts to find out what happened to my QL Homepage site (hint: look at top of QL Forum home page).
EDIT: Derek's reply and mine crossed, sorry.

[axeman]

Thanks for the help so far

I'm trying the Jessops 64Mb and a Sandisk 64MB which are supposed to be more reliable but get the same on both

WIN_FORMAT 1
WIN_DISK "INIT",1
returns not found

WIN_DISK "CREATE",1,1,64
returns not found

pr0f - Pin 9 is grounded on the adapter

I'll look into the RGB cable issue later once this is solved

[Derek_Stewart]

Hi,

Just in case you can not find thevsupport files, here is the QubATA manual.

QubATA_Manual_Rev2.pdf

QubATA Manual

(895.72 KiB) Downloaded 82 times

[NormanDunbar]

I'm trying the Jessops 64Mb and a Sandisk 64MB which are supposed to be more reliable but get the same on both

I wonder! Many years ago, I bought an iRiver H340 music player -- bear with me, it will get relevant -- which has an IDE drive of around 340 MB. However, it had a seriously short battery life, which was shorter than I would have liked. I bought an IDE adaptor and a 64 Gb Compact Flash card and replaced the IDE drive.

The adaptor did not work in the H340 and neither did another one I also purchased or obtained -- I can't quite remember -- more recently. The CF card itself is fine and is currently embedded in the music console in MrsD's Honda CRV, and has all her music on it, as opposed to mine.

So, my point being, perhaps the IDE->CF adaptor isn't working or isn't compatible with the QubIDE? Just a thought. I'm not sure how you would go about testing it though.


Having said this, I do hope you get it working.


Cheers,
Norm.

[axeman]

Also might a Minerva ROM reveal more troubleshooting info?

Is there anyway to format the card on a PC such as with DrvImage for the Spectrum ?

[axeman]

Thanks Derek. Invaluable.

Hi,

Just in case you can not find thevsupport files, here is the QubATA manual.
QubATA_Manual_Rev2.pdf

[axeman]

Progress!!
Managed to get the SanDisk 64Mb CF card to work. I noticed the adapter card light didn't come on when turning on the QL and there was activity when the Qubata boot messages came on. Plus the card name is shown.

The usual Win_format, win_disk init commands worked and I was able to format the card albeit at 32mb as trying to format 64mb reported disk full.

However on reboot the adapter light was full on immediately and went off during Qubata boot messages and the card again wouldn't work. At least it's progress