PSU alternative?
PSU alternative?
My recently acquired QL didn't come with a power supply and finding one is proving very difficult. Is there another way of powering it? I don't mind some soldering/modding if needed.
- 1024MAK
- Super Gold Card
- Posts: 593
- Joined: Sun Dec 11, 2011 1:16 am
- Location: Looking forward to summer in Somerset, UK...
Re: PSU alternative?
Will you be using Microdrives and/or the serial ports?
Mark
Mark


“There are four lights!”
Step up to red alert. Sir, are you absolutely sure? It does mean changing the bulb

Looking forward to summer in Somerset later in the year

QL, Falcon, Atari 520STFM, Atari 1040STE, more PC's than I care to count and an assortment of 8 bit micros (Sinclair and Acorn)(nearly forgot the Psion's)
Re: PSU alternative?
I'd rather not use the microdrives, but i'm still looking at alternatives for now. Serial ports, probably not.
- belg4rion67
- Trump Card
- Posts: 194
- Joined: Sun Feb 20, 2011 6:15 pm
- Location: Milan - Italy
Re: PSU alternative?
You have some alternatives: if you don't use microdrive and serial port you can plug only 9 volts and ground to power on your QL or you can try to search on ebay or on sellmyretro.com website an original power unit.
I've one spare unit but with Italian plug and a shipment to england is very expensive, so is easier to find it in your country
good luck!
Paolo
I've one spare unit but with Italian plug and a shipment to england is very expensive, so is easier to find it in your country
good luck!
Paolo
Only original hardware! 

Re: PSU alternative?
Is the 9V used for anything other than powering the 7505?
If not then why not solve 2 problems by powering off a small regulated 5V supply?
Cheers.
Phill.
If not then why not solve 2 problems by powering off a small regulated 5V supply?
Cheers.
Phill.
-
- RWAP Master
- Posts: 2892
- Joined: Sun Nov 28, 2010 4:51 pm
- Location: Stone, United Kingdom
- Contact:
Re: PSU alternative?
I thought we found out that the MC1377P needed 12V to produce a video output - see:
http://theqlforum.com/viewtopic.php?f=2& ... ack+screen
This might help you Glenn as that user had to make up a working PSU too...
http://theqlforum.com/viewtopic.php?f=2& ... ack+screen
This might help you Glenn as that user had to make up a working PSU too...
Rich Mellor
RWAP Software
RWAP Adventures
SellMyRetro
Retro-Printer Module - add a USB printer to your QL
Also Involved in:
Icephorm
RWAP Software
RWAP Adventures
SellMyRetro
Retro-Printer Module - add a USB printer to your QL
Also Involved in:
Icephorm
- 1024MAK
- Super Gold Card
- Posts: 593
- Joined: Sun Dec 11, 2011 1:16 am
- Location: Looking forward to summer in Somerset, UK...
Re: PSU alternative?
The original QL PSU has a AC output and a 9V unregulated DC output. The 9V DC supply feeds the main board 5V regulator and feeds the Microdrives (each of which has it's own 5V regulator). The AC supply is used to feed a +12V regulator and a -12V regulator. The serial ports and part of the video system use the +12V supply. The serial ports and a Microdrive improvement modification use the -12V supply.
This is the relevant part of the thread that is being referred to: see here.
However, if you are not using the Microdrives or the serial ports, you don't need a -12V supply.
You can use either a 2A regulated or unregulated 9V DC power supply and a cheap step-up DC to DC converter (to provide a 15V DC supply which connects to the AC input so that the +12V regulator powers up). Or you can by-pass the QL's internal voltage regulators and feed it directly with regulated +5V DC and +12V DC regulated supplies.
Note that the Microdrives may well work okay without the -12V supply being present. I have not tried using the Microdrives like this.
Mark
This is the relevant part of the thread that is being referred to: see here.
However, if you are not using the Microdrives or the serial ports, you don't need a -12V supply.
You can use either a 2A regulated or unregulated 9V DC power supply and a cheap step-up DC to DC converter (to provide a 15V DC supply which connects to the AC input so that the +12V regulator powers up). Or you can by-pass the QL's internal voltage regulators and feed it directly with regulated +5V DC and +12V DC regulated supplies.
Note that the Microdrives may well work okay without the -12V supply being present. I have not tried using the Microdrives like this.
Mark


“There are four lights!”
Step up to red alert. Sir, are you absolutely sure? It does mean changing the bulb

Looking forward to summer in Somerset later in the year

QL, Falcon, Atari 520STFM, Atari 1040STE, more PC's than I care to count and an assortment of 8 bit micros (Sinclair and Acorn)(nearly forgot the Psion's)
- 1024MAK
- Super Gold Card
- Posts: 593
- Joined: Sun Dec 11, 2011 1:16 am
- Location: Looking forward to summer in Somerset, UK...
Re: PSU alternative?
QL technical information is available here, including some details of the QL power plug and the ratings of a QL PSU.
Mark
Mark


“There are four lights!”
Step up to red alert. Sir, are you absolutely sure? It does mean changing the bulb

Looking forward to summer in Somerset later in the year

QL, Falcon, Atari 520STFM, Atari 1040STE, more PC's than I care to count and an assortment of 8 bit micros (Sinclair and Acorn)(nearly forgot the Psion's)
- 1024MAK
- Super Gold Card
- Posts: 593
- Joined: Sun Dec 11, 2011 1:16 am
- Location: Looking forward to summer in Somerset, UK...
Re: PSU alternative?
For a suitable step up DC - DC converter, search a well known auction site for "DC - DC step up converter LM2577".
Mark
Mark


“There are four lights!”
Step up to red alert. Sir, are you absolutely sure? It does mean changing the bulb

Looking forward to summer in Somerset later in the year

QL, Falcon, Atari 520STFM, Atari 1040STE, more PC's than I care to count and an assortment of 8 bit micros (Sinclair and Acorn)(nearly forgot the Psion's)
Re: PSU alternative?
Maybe I got this totally wrong, since I´m not an electronics guy, but I always got told that using a DC-DC converter on an QL would be a no-go, although it works just nicely on the Spectrum. I never understood the reasons behind.
My beloved residents:
http://schombi.de/my-retro-collection.html
http://schombi.de/my-retro-collection.html