Page 1 of 1

ZX Spectrum 48 and 128 emulation on QL

Posted: Sun Nov 17, 2024 9:24 am
by vox
Does it work since we have less colours in 320x (256x) and same beeper?
Any recommended sw?
Does it work on 128,640,768k 68008

512k A500 could do it, same early Macs

I wish Sinclair included tape port and emu in ROM. That would be a winner!

Re: ZX Spectrum 48 and 128 emulation on QL

Posted: Sun Nov 17, 2024 9:37 pm
by bwinkel67
There are a few Spectrum emulators for the QL. All require more than the standard 128K memory, and most recommend acceleration (i.e. Gold Card or better):

https://dilwyn.theqlforum.com/spectrum/index.html

There are also ZX81 emulators for the QL. One is a true one that requires extra memory and recommends acceleration, and the other is a ROM only and runs on 128K (that I wrote):

https://dilwyn.theqlforum.com/zx81/index.html

(I haven't posted a distribution anywhere but this forum since it's not 100% complete yet https://www.theqlforum.com/viewtopic.php ... &start=170)

Re: ZX Spectrum 48 and 128 emulation on QL

Posted: Mon Nov 18, 2024 6:58 am
by Derek_Stewart
HI,

For Tape support through Q: NET port look at Spectulator, Spectator and ZXM series, on QL Home Page, in Spectrum section

Re: ZX Spectrum 48 and 128 emulation on QL

Posted: Mon Nov 18, 2024 7:23 am
by vox
Derek_Stewart wrote: Mon Nov 18, 2024 6:58 am HI,

For Tape support through Q: NET port look at Spectulator, Spectator and ZXM series, on QL Home Page, in Spectrum section
Thank you all. Luckily I will have mem expansion