Page 1 of 1

Sandy CP/Mulator

Posted: Fri May 18, 2018 10:17 pm
by RWAP
Was there ever a manual for the Sandy CP/Mulator?

I have a ROM cartridge, a microdrive cartridge and disk, but no manual...

Re: Sandy CP/Mulator

Posted: Sat May 19, 2018 3:06 am
by Dave
Yes, there was a manual. I don't have a copy, or I would post it for you.

Re: Sandy CP/Mulator

Posted: Tue Apr 30, 2024 4:06 pm
by t0nyt
I was wondering if a manual for CP/Mulator ever surfaced anywhere please?

Many thanks

Re: Sandy CP/Mulator

Posted: Tue Apr 30, 2024 6:12 pm
by t0nyt
t0nyt wrote: Tue Apr 30, 2024 4:06 pm I was wondering if a manual for CP/Mulator ever surfaced anywhere please?

Many thanks
Also, does anyone know if the MD that comes with CP-Mulator contains the same files as the floppy disk please?

I have a good floppy disk (and image) of the CP-Mulator software, but the MD I have actually seems to be just part of a different CP/M

IMG_3824.jpeg
IMG_3824.jpeg (44.27 KiB) Viewed 1244 times
IMG_3826.jpeg
IMG_3826.jpeg (26.99 KiB) Viewed 1244 times

Many thanks

Re: Sandy CP/Mulator

Posted: Tue Apr 30, 2024 11:38 pm
by Andrew
RWAP wrote: Fri May 18, 2018 10:17 pm Was there ever a manual for the Sandy CP/Mulator?

I have a ROM cartridge, a microdrive cartridge and disk, but no manual...
I have the manual. I attached a scan.
I also have a Basic-80 MBASIC Reference manual - I do not know if it was part of the CP/Mulator kit or an add-on from the previous owner
t0nyt wrote: Tue Apr 30, 2024 6:12 pm Also, does anyone know if the MD that comes with CP-Mulator contains the same files as the floppy disk please?
My CP/Multaor disk has the following files:
boot1
boot_cpm
CCP_SYS
CPMU_EXE
G.B_
M __
QLBDOS
Z80_EMU
asm_com
CBAS2_COM
COPY_COM
CRUN2_COM
DEBUG_COM
DUMP_COM
ED_COM
ERQ_COM
L80_COM
M80_COM
MBASIC_COM
PIP_COM
STAT_COM
SUBMIT_COM
XREF_COM
_HEX
_PRN

The mdv has only the following:
boot_bas
clone_bas
cpmu_exe
install_bas
rdcpm_exe
@menu_com

Re: Sandy CP/Mulator

Posted: Wed May 01, 2024 6:50 am
by t0nyt
Hi Andrew

Many thanks for the Manual!!!

My Floppy (which has the original label/serial no to match the plug-in ROM) only has the files that you have on your MDV

The files on your floppy had me a bit confused. Then I realised I had previously downloaded a zip from somewhere (maybe from another thread on here?) which had those same files as on your floppy. That seems to be a version of CP/Mulator that runs WITHOUT the ROM being inserted (at least it run's in Q-emuLator, not tried on my QL yet)

EDIT: one big difference is that the disk that came with the ROM is v2 while the version that doesn't need the ROM is v1.3

Many thanks

Re: Sandy CP/Mulator

Posted: Sat May 04, 2024 4:02 pm
by Derek_Stewart
Andrew wrote: Tue Apr 30, 2024 11:38 pm
RWAP wrote: Fri May 18, 2018 10:17 pm Was there ever a manual for the Sandy CP/Mulator?

I have a ROM cartridge, a microdrive cartridge and disk, but no manual...
I have the manual. I attached a scan.
I also have a Basic-80 MBASIC Reference manual - I do not know if it was part of the CP/Mulator kit or an add-on from the previous owner
t0nyt wrote: Tue Apr 30, 2024 6:12 pm Also, does anyone know if the MD that comes with CP-Mulator contains the same files as the floppy disk please?
My CP/Multaor disk has the following files:
boot1
boot_cpm
CCP_SYS
CPMU_EXE
G.B_
M __
QLBDOS
Z80_EMU
asm_com
CBAS2_COM
COPY_COM
CRUN2_COM
DEBUG_COM
DUMP_COM
ED_COM
ERQ_COM
L80_COM
M80_COM
MBASIC_COM
PIP_COM
STAT_COM
SUBMIT_COM
XREF_COM
_HEX
_PRN

The mdv has only the following:
boot_bas
clone_bas
cpmu_exe
install_bas
rdcpm_exe
@menu_com
I have cleaned up the CPMulator manual.

But there is Page 1 of the CPMulator manual missing.