The Sinclair QL Forum

Code: Select all

struct aStruct {
    int *count;
    char *str;
};  /* NOTE(!): Here the semicolon is REQUIRED(!) A dangerous pitfall of C/C++ */

struct invalidDigitalPrecisionCStruct {
    struct aStruct  unallowedMemberOfStruct;
};

Code: Select all

5.     WRITING MACHINE CODE FUNCTIONS FOR USE FROM C

Writing  machine  code functions  for  DIGITAL  C SPECIAL  EDITION  is
sometimes desirable for  efficiency in speed and  size.  The existence
of this  section on  technique is  in no  way indicative  that Digital
Precision offer  any support at  all for  the writing of  machine code
functions -  in fact, we WILL  NOT answer any questions  whatsoever on
this topic.  This section  is only for  very experienced  machine code
programmers  who already  have  an excellent  understanding of  M68000
machine code,  who are fluent with  the use of assemblers  and who are
prepared  to experiment  and  able  to solve  their  own problems.  We
recommend the  use of the  HiSoft assembler  and our own  IDIS SPECIAL
EDITION. Now you are on your own.

Reread section 4.16.4 .

5.1    Intermediate code

The DIGITAL C SPECIAL EDITION parser cc outputs a compact intermediate
code  which  is  translated  into  68008  machine  code  by  the  Code
Generator/ Linker, cg.  The intermediate  code consists of single byte
instructions followed by 0, 1 or 2 parameters. For example:

       push         pushes a value onto the stack and has no
                    parameters
       load "name"  loads the value of the variable called "name"
                    into a register.

Because of  the need  to link separate  modules together,  and because
variables and/or  functions referred to  may be in  different modules,
the  names  of  variables  and functions  must  be  contained  in  the
intermediate code as  ASCII strings.  If you copy an  "_obj" module to
the screen,  you will see names  intermingled in the code.   It is the
task of cg  to resolve all inter-module  references.  This contributes
to making writing machine code functions somewhat tedious!

5.2    Register usage

DIGITAL C  SPECIAL EDITION compiled  code does  not use all  the 68008
registers.  However, the majority of the library functions supplied in
std_lib  are in  machine code.  Hence it  is sensible  not to  rely on
registers holding values between functions, except as described below.
Compiled code uses these registers:

   A5 dsp   Data stack pointer,  used to point to the top  of the data
            stack, as distinct from the A7 stack.  Ensure the value of